Decoral Aluminium Radiators

IMPORTANT INFORMATION

• Lead time: This radiator is held in sections in white, volcanic and raw in the UK and radiators are assembled to order – approximately 3 to 5 working days. Colours are 3 weeks
• Finishes: White is semi-gloss Warm White RAL 9010. Raw is a lacquer over the bare metal, industrial style with metal markings showing through.Swatches are available on request. Special order means that an order cannot be cancelled once manufacturing has commenced.
• Design: Sizes listed are shown up to 1620mm wide ready assembled for short models and up to 820mm wide ready assembled for tall models. However, as this radiator is “sectional”, longer sizes are available on request for on site assembly – these will require a joining tool, which can be supplied on a sale or return basis for £120 via Joining tools. Contact our team to discuss the best way to return the tool and ensure a refund.
• Optional side panels: These are available on request for a surcharge and are plastic panels that are designed to cover the visible fins down each side of the radiator.
• Material: Made of aluminium.
• Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas).
• Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. 1/2″ connections are supplied as standard. Screws are not supplied.
• Projection from the wall: 120mm
• Valve connections: Side valve connections so add 150mm in total to the width of the radiator to allow for valves. (These are not pipe centre measurements.)
• Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
• Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
• Manufacturer’s guarantee: 10 year manufacturer’s guarantee against manufacturing defects.
• Heat outputs: These are shown at operating temperatures of Delta T 50. To alter this, please use our handy Delta T Value Changer shown on every product.
• Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
• Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.
• Tested to meet EN442 certification
• CE Marked
• VAT: The prices shown are inclusive of VAT.