Forge 4 cast iron radiators - 355mm - 955mm high

IMPORTANT INFORMATION

Our factory has developed a patent pending lacquering process which is essential for every polished cast iron radiator. This process will ensure that your polished cast iron radiator will look like they have just been polished for years to come. The lacquer we use is unique; it's special formulation incorporates inhibiting agents along with a non-yellowing, semi-elastic lacquer. The inhibitors prevent any bronzing or rusting from within while the lacquer prevents oxidization of the outer surface without changing the colour of the polished metal. The semi-elastic nature is designed to make damage to the lacquer's outer skin as difficult as possible. However, we supply touch-up lacquer just in case the radiator is scratched during it's lifetime. The finished product has been thoroughly tested – confidence in this guarantee extends to this use of our polished radiators in bathrooms or damp environments. Lacquer is clear and un-tinted as standard plus we now have a satin lacquer and a range of tinted lacquers to choose from. 

Please note: Cast iron radiators have a textured finish. For a smooth finish, see our Bare Metal Classic or Core radiators, which are made of steel.

• Long radiators: Sizes over 1200mm wide will arrive in more than one block to make them easier to move around, meaning they need to be joined together on site. Therefore a joining tool is required and can be supplied on a sale or return basis (£120 refundable deposit). Remember to add a joining tool to your order via Joining tools. Contact our team to discuss the best way to return the tool and ensure a refund.
• Cancellations: Cast iron radiators are made to order.  Once manufacture has commenced, orders cannot be cancelled.
• Lead time: approximately 4-6 weeks.
• Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas) via a commercial pallet carrier service.
• Fixings: Radiators are supplied with the necessary fixings i.e. feet, wall bracket, plugs, bushes and vents. Cast iron radiators are floor-standing (with feet) as standard – wall mounted versions (without feet) are available on request. 1/2" connections are supplied as standard.  (3/4" connections are available on request.) Screws are not supplied.
• Depth: Radiator depth at deepest part (excluding wall bracket) = 180mm
• Projection from the wall: Minimum is depth of radiator plus skirting board depth.
• Valves and finishing touches: These not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
• Heat outputs: These are shown at operating temperatures of Delta T 50. To alter this, please use our handy Delta T Value Changer shown on every product.
• Pipe centre measurements: Cast iron radiators have tapping centres that equal the width of the radiator, so pipe centre measurements equal the width of the radiator plus and appropriate amount for valves.  Bear in mind, some cast iron radiators are hand-finished in the traditional manner so widths of radiators may vary between batches.  For this reason, we don't advise finalising any pipework until the radiators are on site.
• Manufacturer's guarantee: 10 year manufacturer's guarantee against manufacturing defects.
• Water pressure: Maximum working pressure of 6 bar.
• Water treatment: The manufacturer's guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
• Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.
• Made from premium quality cast iron for long-lasting reliability
• Tested to meet EN442 certification
• CE Marked
• High quality rubber EPDM gaskets
• VAT: The prices shown are inclusive of VAT.