Pablo Radiators

IMPORTANT INFORMATION

• Lead time: All models in white are usually in stock: approximately 3 to 5 working days. Other finishes are by special order: approximately 3 to 4 weeks. Special order means that an order cannot be cancelled once manufacturing has commenced.
• Finishes: Finished in Traffic White (RAL 9016) as standard. Choose from a range of 25 other RAL colours. Colour card and swatches are available on request.
• Accessories: Towel rails available on vertical models for a surcharge. Please ask for a quote.
• Material: Made of mild steel.
• Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas).
• Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. 1/2″ connections are supplied as standard. Screws are not supplied.
• Projection from wall to front face (approximate):
  • Horizontal – single panel, single convector = 82mm or 102mm;
  • Horizontal – double panel, single convector = 91mm or 111mm;
  • Horizontal – double panel, double convector = 125mm or 145mm; and
  • Vertical – double panel, single convector = 106mm.
• Valve connections: Horizontal models: Side valve connections, so you need to add an extra 150mm to the width of the radiator to allow for valves. / Vertical models: Underside valve connections, please discuss options with our sales team.
• Valves and finishing touches: These are not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
• Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
• Manufacturer’s guarantee: 5 year manufacturer’s guarantee against manufacturing defects.
• Heat outputs: These are shown at operating temperatures of Delta T 50. To alter this, please use our handy Delta T Value Changer shown on every product.
• Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
• Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.
• Tested to meet EN442 certification
• CE Marked
• VAT: The prices shown are inclusive of VAT.