Column radiator – Core - 650mm - 902mm high

IMPORTANT INFORMATION

• Lead time: Approximately 3-5 working days for white/lacquered bare metal. Approximately 4-5 weeks for colours.
• Stock  White - 3 column - 500mm high , 600mm high, 750mm high, 1800mm high - full range 3-5 days. White - 4 column - 300mm high , 500mm high, 600mm high, 750mm high - full range 3-5 working days. White -2 column - 600mm high , 750mm high, 1800mm high - full range 3-5 days. White 2 column - 500mm high - 13 sections, 18 Sec, 22 Sec, 26 Sec, 30 Sec - 3-5 working days. White - 3 column - 300mm high - 21 Sections, 26 Sec, 30 Sec - 3-5 working days.
• Stock  Lacquer - 3 column - 500mm high , 600mm high - full range 3-5 days - 1800mm high - 7 Section, 9 Sec, 11 Sec, 13 Sec - 3-5 working days. Lacquer - 4 column - 600mm high - full range 3-5 working days. White -2 column - 600mm high , 750mm high, 1800mm high - full range 3-5 days - 500mm high - 10 Sections, 13 Sec, 18 Sec, 22 Sec, 26 Sec. Lacquer 2 column - 1800mm high - full range 3-5 days. 1500mm - 6 Sections, 8 Sec, 10 Sec. - 3-5 working days.
• Finish: Lacquered bare steel is a transparent coating that is applied to the bare mild steel finish. It will expose the manufacturing marks that occur in production of the radiator such as welds and rivets – see close-up image.
• Underside connections These are available on request for an additional charge, they are bespoke so lead time is 6 weeks, they offer a great option to save space with valve connections being underneath the radiator
• Material: Made of mild steel.
• Delivery: We offer delivery to most addresses on the UK mainland (excluding some remote areas).
• Fixings: Radiators are supplied with the necessary fixings i.e. wall bracket, plugs, bushes and vents. 1/2″ connections are supplied as standard. Screws are not supplied.
• Projection from the wall: 2 column - 90mm / 3 column -130mm / 4 column - 164mm
• Valve connections: Side valve connections so add 150mm in total to the width of the radiator to allow for valves. (These are not pipe centre measurements.)
• Valves and finishing touches: These are not included as there is now so much choice available. See our Valves page for valves and accessories to complete the look.
• Pipe centre measurements: Approximate pipe centres can be provided if you wish to install your pipework in advance of receiving your radiator.
• Manufacturer’s guarantee: 10 year manufacturer’s guarantee against manufacturing defects.
• Heat outputs: These are shown at operating temperatures of 90/70/20 Δt60. To obtain Δt50 outputs, multiply the outputs shown by 0.789.
• Water treatment: The manufacturer’s guarantee will only be valid if your radiators are installed in accordance with British Standards. This means that, on completion of installation, the system should be properly flushed and filled to remove debris and minimise the presence of solid particles and chemical residues, which may cause corrosion and damage within the system. Corrosion inhibitor should be used in accordance with British Standards and should take into account the particular metals within the system.
• Terms and Conditions: All sales are subject to our standard Ts and Cs; a copy can be downloaded from our website.
• Tested to meet EN442 certification
• CE Marked
• VAT: The prices shown are inclusive of VAT.